+1.450.649.7343 FR

SANI-SPONGE

Sani-Sponge Kits are offered to test the carcasses for salmonella, E. coli and other pathogens.

The Labplas SANI-SPONGE kit is designed to collect samples to detect the presence of microbiological contaminations such as Listeria, Salmonella, E. coli, and other food-born pathogens on almost any surface. These kits are widely used in the food, medical, public health and cosmetic industries. The SANI-SPONGE kit is convenient, easy to use, and helps eliminate several time-consuming steps.

Product Specs :

  • Comes in TWIRL'EM® Sterile Sampling bag
  • 6.3 x 11 inches. (160mm x 229mm); 4 mil. inches. (101 micr.)
  • 20 oz (600 ml)
  • TWIRL’EM bag with impervious closure system
  • Gamma Sterilized
  • Labplas SANI-SPONGE Sampling Kits come in two varieties: Dry sponge or Wet Sponge*

 

Labplas SANI-SPONGE sampling kits are produced in accordance with HACCP, USDA, ACIA and CFIA requirements.

SANI-SPONGE picture
Step 1

Remove the tear-off strip and carefully take the sponge out.

(sterile gloves are recommended). Do not touch the inside of the bag;

Step 2

Swab the sampling surface (suggested 30 x 30 cm area/12''x12'') with the sponge in a vertical (up and down) motion;

Step 3

Turn the sponge over and swab the sample area again, this time in a horizontal (left to right) motion;

Step 4

Place the sponge in the sterile sampling bag with care;

Step 5

Identify the sample on the write-on area with a permanent marker.

SANI-SPONGE Kit with Dry Sponge

Code mil. in micr. in x in mm x mm oz ml Packaging
KSS-61100 - Dehydrated sponge 2.5 63 4.5 x 9 114 x 229 15 450 Cs/400 (4x100)
KSS-61105 - Dehydrated sponge with gloves 2.5 63 4.5 x 9 114 x 229 15 450 Cs/400 (4x100)

SANI-SPONGE Kit with Wet Sponge

Code mil. in micr. in x in mm x mm oz ml Packaging
KSS-67110-DE - DE-Neutralizing buffer 4 101 6.3 x 11 160 x 229 20 600 Cs/100 (5x20)
KSS-67110-LT - Letheen broth 4 101 6.3 x 11 160 x 229 20 600 Cs/100 (5x20)
KSS-67110-NE - Neutralizing buffer 4 101 6.3 x 11 160 x 229 20 600 Cs/100 (5x20)
KSS-67110-BPW - Buffered peptone water 4 101 6.3 x 11 160 x 229 20 600 Cs/100 (5x20)
KSS-67115-DE - DE-Neutralizing buffer with gloves 4 101 6.3 x 11 160 x 229 20 600 Cs/100 (5x20)
KSS-67115-LT - Letheen broth with gloves 4 101 6.3 x 11 160 x 229 20 600 Cs/100 (5x20)
KSS-67115-NE - Neutralizing buffer with gloves 4 101 6.3 x 11 160 x 229 20 600 Cs/100 (5x20)
KSS-67115-BPW - Buffered peptone water with gloves 4 101 6.3 x 11 160 x 229 20 600 Cs/100 (5x20)